|Patented 4-Sided Design
4-Sides of Light
4-Sides of light provides
360 degree radius of light
|Dare to Compare
|Color can make a Difference
While Green Light is popular these days, there are times White Light will outperform Green Light.
Many of our SuperBrite-X2 customers tell us using BOTH White and Green combined produces the most fish.
|Lights by Comparison
|Run times shown below are using a Group 27, 12VDC, 115-amp hr. Deep Cycle Battery.
|Copyright © 2003
All rights Reserved
Low Voltage Operation
HID, Mercury Vapor and Metal Halide lights use 120VAC in the water which can be
deadly to you or a loved one's if the power-cord is cut or damaged or if the light
malfunctions in any way. While GFCI outlets do offer a limited amount of
protection, the outlets themselves are prone to malfunction when used in outdoor
We've all been told Mixing Electricity with Water cannot only be deadly, but it's
something you just never do. But, prior to the development of High Intensity LEDs,
the only way to make a light bright enough for underwater use was to use
Halogen, Mercury Vapor, Metal Halide or HID bulbs powered by 120VAC.
Fortunately, with the advent of High Intensity LEDs, underwater lights no longer
have to be made using High Voltage Lamps.
High Intensity LEDs produce More Lumen's Per Watt, are Less Expensive to
Operate and are Safe To Operate in the Water.
Before you purchase your next underwater light, remember,
AC Voltage in Water is a Tragedy Waiting to Happen.
Our DockPro 10000 is a Water Safe, Low Voltage Underwater light that is not only
bright, but also Safe in the water.
|SuperBrite 4-Sides of LEDs
|AlumiGlo LED Lights are All Aluminum Construction
(No Plastic or Glass parts)
Patented 4-Sided Design for MORE Light!
|Stainless Steel Strain Relief
Aluminum End Cap comes complete
with a stainless steel Strain Relief
which prevents the power-cord from
pulling loose from the light.
|Before You Buy Please take a minute to compare our lights features against our competitors lights
features and them make up your own mind which light would be the best light for you.
You should be able to do a side by side comparison of our lights versus any of our competitors. If our
competitors do not list the below features ....THERE IS A REASON!
|All Aluminum Construction
No Glass or Plastic parts
Even the End Caps are Aluminum.
Similar lights use Plastic end caps
which will break when dropped.
|Questions? We can help you pick the best light for your application.
CALL US - 785-621-2646
|LUMENS? What is the total lumen output of the light?
WATTS? What is the total Wattage of the light? In most cases, more watts mean more light.
HOW MANY LEDs? The numbrt of LEDs does the light have? The number of LEDs isn't as important
as the total lumen's and wattage outputs, but it is a factor to consider.
LED STRIPS or CIRCUIT BOARD? Does the light use LED Strips or LED Circuit Boards?
LED strips are used in many inexpensive lights because of cost. Heat will eventually cause the
strips to crack and short circuit. AlumiGlo lights use solid state circuit boards in all lights.
HOUSING MATERIAL? Is the light made of plastic or aluminum? Plastic housings will eventually
fade and or crack which can cause reduced light and leaking. AlumiGlo lights are solid aluminum
and use not plastic or glass parts.
HOW MANY SIDES OF LIGHT? In order to achieve a true 360 degree radius of light the light has to
have at least 4-sides of light. SuperBrite lights use a patented 4-sided design.
LENGTH OF POWER-CORD? A 25 ft power-cord is required to reach the batteries in most boats.
Power-cord length is many times overlooked until it's too late.
CLIPS OR PLUG? Most light only come with battery clips that are attached to the power-cord. All
AlumiGlo lights come with our Pick-A-Plug feature that allows you to use either Battery Clips or a
Cigarette Plug which are both included with each light.
WATER DEPTH? Most plastic or PVC lights can only be used at depths up to 15 ft deep or they will
leak. AlumiGlo lights are tested and guaranteed to be leak free at 50 ft or more. If the light uses an
outer tube to water proof the LEDs there is air inside of the tube. The deeper the light goes, the
pressure becomes too great which causes the light to leak. AlumiGlo lights use no outer tube and
there is no air sealed inside the lights that can pressurize at greater depths.
4-Sides of LEDs
|Fishing - Docks - Flounder - Bowfishing - Shrimp
|8:30 AM to 5:00 PM CT
Monday thru Friday
|Marine LED Lighting
|Building Quality Lights
For 37 Years!
|8:30 AM to 5:00 PM CT
Monday thru Friday